Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across San Marino
When a gate sticks, drags, or stops responding in San Marino, you want someone who understands what’s actually holding it up. We do. Our technicians have up to 13 years of experience, and every one of them works on gates only – not garage doors, not fences, not general handyman work. That focus matters on San Marino properties, where a driveway gate is often a piece of custom ironwork hung in a masonry pier, and the fix is rarely a straight swap. Call (888) 853-9043 and we’ll get a technician out. We answer 24/7. Fast dispatch, 7am-7pm.
Why San Marino Homeowners Call Glendale Gate Repair for Gate Repair
San Marino residents tend to have gates that were built to last, which is exactly why they call us. A stock operator isn’t the answer when your gate is a one-off. We diagnose the actual problem – a hinge plate pulling out of brick, a footing that shifted, a control board that failed – and we fix that, not a symptom.
We’re a gate-only shop. That means we don’t split our attention between gates and everything else, and we don’t upsell work you don’t need. If a repair makes sense, we’ll tell you. If a replacement does, we’ll tell you that too, honestly. We work on the brand you already have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. No workarounds, no guesswork.
San Marino is close to our service area, so response is quick. We know the streets and we know the housing stock – the Revival homes along Huntington Drive and the estate lots off Oak Knoll, where gates run long and heavy and operators get pushed hard. For more on what we do across the region, see our gate repair service page.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding in San Marino
Gate Welding in San Marino usually means heritage ironwork, not a quick tack. The gates on these estate lots are often original wrought iron or ornamental steel from the 1920s, and when a hinge pulls out, a rail cracks at a weld, or a stile fatigues from years of swinging, the repair has to match what’s there. We weld in place where we can, prep the surface properly, and finish so the joint blends with the surrounding metal rather than announcing itself. A typical welding repair in San Marino runs $180 to $450, depending on access, metal type, and whether the piece needs refinishing.
Cracked Frames and Fatigue Welds
Older iron and steel gates develop stress cracks at the corners and where the hinge stile meets the rails. These aren’t cosmetic. A cracked frame flexes, and flex throws the gate out of alignment with the latch and operator. We grind out the crack, weld it properly, and check the whole frame while we’re there.
Matching Heritage Ironwork
When a section of ornamental iron has rusted through or been damaged, the replacement scroll or picket needs to match the original profile, spacing, and patina. We match existing detailing so a repair doesn’t stand out. That takes a little longer than bolting on a stock piece, and it’s worth it on a gate that’s been part of the property for generations.
Commercial Gate Repair in San Marino
Commercial Gate Repair in San Marino serves the small commercial properties, institutional entries, and gated access points around town where a failed gate means blocked access or a security gap. The work here runs heavier than a residential fix: vehicular slide gates, overhead operators, loop detectors, and access control that has to keep functioning. We handle the whole system, from the operator to the safety edges to the access components. A typical commercial gate repair in San Marino runs $280 to $850, depending on the operator, the fault, and whether access control is involved.
Access Control and Loop Detectors
When a commercial gate won’t open for a vehicle, the problem is often the loop detector or the access reader, not the gate itself. We test the whole chain – reader, controller, loop, operator – and fix the actual failure. That saves you from replacing an operator that was working fine all along.
Keeping Access Open During Repair
On a property with steady traffic, a gate down for days is a real problem. We diagnose quickly, and where a part is needed we’ll tell you upfront what the timeline looks like. Most faults we can resolve without extended downtime, and for heavier systems we plan the repair around the schedule of the property.
Trusted Brands We Service in San Marino
We work on the operator you already have, and we know it in detail. That includes LiftMaster for a lot of residential swing and slide systems, FAAC on heavier commercial-grade installations, BFT for high-traffic setups, plus Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When your gate fails, we diagnose the actual brand and model, not a generic guess. We don’t stock parts locally, but we source what’s needed and turn repairs around fast. No vague “all brands” claims – nine specific systems, and the ones we work on we know well.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in San Marino Homes
- Hinge plates working out of cracked mortar. Original pintles set into 1920s brick and stone piers crack over time. When the mortar fails, a heavy gate sags and binds at the latch. The lasting fix is re-setting and re-grouting the plate in the masonry, not rehanging the gate.
- Seasonal swing alignment drift. Hot, dry summers dry out wood gates and masonry pier caps; winter wet swells wood and corrodes older iron. Alignment problems come and go with the season, and they show up first at the latch side.
- Long slide gates overrunning the rack and pinion. Estate lots along Lorain Road mean long, heavy sliding gates. When the post footing shifts, the rack and pinion go out of mesh and the operator strains. That’s an alignment and footing problem, not an operator problem.
- Failed entrapment protection. Safety photocells and edges degrade quietly. On a heavy custom gate, a non-functioning safety edge is a real hazard, and it should be verified, not assumed to be working.
Pricing for Gate Repair in San Marino, CA
We give honest ranges so you can plan. A typical gate realignment in San Marino runs $150 to $350. Hinge and post repair, where the plate has to be re-set in masonry, runs $200 to $500. Lock repair is generally $95 to $250. Electric gate repair – motors, control boards, remotes, access components – runs $185 to $600. Welding and rust repair is $180 to $450. Commercial work runs higher. The exact price is set per job by the written estimate, and it’s quoted and agreed before any work starts. The estimate is free.
We Also Serve Cities Near San Marino
We cover San Marino and the surrounding area, including San Gabriel, East Pasadena, South Pasadena, and North El Monte. If you’re in San Marino or a neighboring city and your gate needs a repair, we’ll get a technician to you. The same gate-only focus applies wherever you are.
Serving San Marino, CA – Our Local Coverage Area
We serve San Marino and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Marino
The gate can almost always be saved. Dragging on an older arched iron gate is usually a hinge plate that has worked loose from cracked mortar in the pier. The fix that lasts is re-setting and re-grouting the hinge plate in the masonry, then correcting sag at the post – not replacing the gate. Call (888) 853-9043 for an on-site estimate.
Yes, but it takes proper sizing. A heavy, nonstandard-width custom gate needs an operator matched to its actual weight and travel. We measure, recommend the right operator, and set it up correctly. It’s not a stock swap. Call (888) 853-9043 to talk through your gate.
You test it, and you have a technician verify it. Entrapment protection – photocells and safety edges – is what stops a gate from closing on a person or vehicle. It should be checked against UL 325 requirements, and it should be functioning, not just present. We verify it on every job. Call (888) 853-9043.
Because the material moves. Dry summers dry out wood and masonry pier caps, and the winter wet swells wood and drives corrosion in older iron. That cycling throws swing alignment out, and it shows first at the latch. A realignment fixes it, and re-setting a loose hinge plate stops it from coming back. Call (888) 853-9043.
More than an operator swap. Long, heavy slide gates on estate lots strain the rack and pinion and overrun the operator when the post footing has shifted. We check the footing, correct the alignment, and re-tension the rack before looking at the operator. That’s the repair that holds. Call (888) 853-9043 for an estimate.
Whether your gate is dragging, binding, or an operator that’s quit, we can get it working again. We work on the brand you already have, we fix the actual problem, and we give you a written estimate before any work starts. Call (888) 853-9043. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Glendale Gate Repair.