Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Marino, CA
Gate installation in San Marino is a different job than it is almost anywhere else in the San Gabriel Valley. The city is full of custom gates, not stock panels, and most of them were built to sit inside masonry piers on estate lots where the driveway is long enough to justify a heavy sliding leaf. We’re Glendale Gate Repair, and gates are the only thing we do: installation, repair, and electric gate work. Our technicians have up to 13 years of experience, we work on the brand you already have, and every price we quote is set per job in writing before a single tool comes off the truck. Call (888) 853-9043 for a free estimate.
Why San Marino Homes Are Different
San Marino was largely built out between the 1910s and 1940s as a city of grand Revival estates, and that history is still standing in the ironwork. Spanish Colonial, Tudor and Mediterranean homes here commonly have original wrought-iron and cast-iron gates hung in brick, stone or stucco piers, often with arched tops and widths that were fabricated for that one driveway. Newer rebuilds have to match that detailing, which means a gate job in San Marino starts with matching, not with a catalog.
The climate works on those materials in both directions. Hot, dry summers and Santa Ana wind events cycle and warp wood gates and dry out masonry pier caps, while the winter wet season pushes corrosion into older ironwork and swells wood leaves until they bind. Swing alignment problems come and go with the seasons, and a gate that closes fine in July can drag in January. Lots along Huntington Drive, Oak Knoll and Lorain Road are long and private, so many gates are heavy sliders that put real strain on an operator – strain you never see on a tract-home gate. There’s a pattern worth knowing: arched custom iron gates from the 1920s often sag not because the gate is failing but because the original pintles and hinges were set into mortar that has since cracked, so the fix is re-setting hinge plates in brick and stone rather than replacing the gate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main San Marino Services
Two calls come in from San Marino more than any other: gates that need repair, and gates whose motor, board or access hardware has quit. Both are handled by technicians who work on gates exclusively.
Gate Repair in San Marino
Most repair work in San Marino is structural, not cosmetic. Hinge plates pull loose from cracked mortar, heavy iron leaves drop and drag on the driveway, latches stop lining up as a pier cap shifts, and sliders jump their track after a season of expansion and contraction. When you call for gate repair, we look at how the gate was hung before we look at what’s broken, because in this city the gate is usually fine and the anchor point isn’t. Welds, hinge re-setting, track and roller work and alignment are all part of the visit, and we say plainly whether repair makes sense or replacement does.

Electric Gate Repair in San Marino
Automated gates on these lots tend to be long, heavy and working harder than the operator was sized for, which is why motor and board failures show up here alongside the usual remote and sensor problems. Electric gate repair covers the operator itself, control boards, loop detectors, safety edges, keypads and access control, and because we diagnose the actual brand installed we aren’t guessing at wiring diagrams. If a general repair shop has already told you they don’t touch gate operators, that’s the point where we’re worth calling. Power and control wiring on a gate operator is dangerous work – it belongs with a trained technician, not a weekend project.

Gate Installation in San Marino
Installing a gate in San Marino means matching what’s already there. The city’s 1910s-1940s Revival estates carry original wrought-iron, cast-iron and wood gates set in brick, stone and stucco piers, and the standard gate width you’d buy off a shelf simply doesn’t fit these driveways. Add hot, dry summers and Santa Ana wind events that dry out pier caps and warp wood, and you get a job where the gate has to be built for the opening and for the weather. Whether you’re replacing a leaf that’s beyond saving or adding automation to a gate that’s been manual for decades, our Gate Installation work covers the whole span from measurement to final cycle test. Our technicians have up to 13 years of experience, and on multi-brand systems like Elite, LiftMaster and FAAC we diagnose the operator you actually have instead of working around it.
Driveway Gate Installation
Signs you need it
You need a driveway gate installed when the opening has never had one, when the existing leaf is rusted through or cracked beyond welding, or when the gate no longer matches piers that have already been rebuilt.
What it costs in San Marino
Driveway gate installation in San Marino typically runs $2,500 to $8,000 for the gate and hardware, and $4,500 to $12,000 once automation, safety devices and the power run are included.
How we do it
We measure the actual opening and pier faces on site, confirm swing or slide and hinge strategy with you, fabricate or order to that measurement, then set posts, hang the leaf and cycle-test it under load before we call it done.
Sliding Gate Installation
Signs you need it
A sliding gate is the right call when the driveway is long and the gate is heavy, and it’s overdue when an existing slider has bent its track, stripped rollers or outgrown the operator pushing it.
What it costs in San Marino
Sliding gate installation in San Marino is typically $3,000 to $9,500 for the gate and track, and $5,500 to $14,000 with an operator, safety edges and the electrical work included.
How we do it
We set the track and posts to proper footing depth for the soil and load, level the rail over its full run, hang and balance the leaf, then align the operator and test the safety edges and reversing before handover.
What Gate Installation Costs in San Marino
| Item | Typical range in San Marino |
|---|---|
| Driveway gate, gate and hardware | $2,500 – $8,000 |
| Driveway gate with automation and power | $4,500 – $12,000 |
| Sliding gate, gate and track | $3,000 – $9,500 |
| Sliding gate with operator and safety edges | $5,500 – $14,000 |
Can you install a gate that matches the original ironwork on my San Marino home?
Yes. On Revival-era homes we measure the existing piers and match profile, spacing and finish so a new leaf reads as part of the original ironwork rather than a replacement. We’ll tell you honestly what can be preserved and what needs rebuilding.
Does the installation include the operator and safety edges?
It can, and on a heavy San Marino gate it usually should. Automated installation covers the operator, safety edges, loop detectors and the power run, all quoted in writing before work starts. Call (888) 853-9043 for a free estimate.
Brands We Service in San Marino
We work on the brand you already have, and that list is specific rather than vague: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule, spanning residential units like Mighty Mule and commercial-grade systems like FAAC and DoorKing. See our brands for the full picture. Because we diagnose the installed brand directly, turnaround stays predictable. No parts are stocked locally – we quote and schedule what the job needs.
Pricing for Gate Company in San Marino, CA
| Service | Typical range in San Marino |
|---|---|
| Gate installation (driveway, gate and hardware) | $2,500 – $8,000 |
| Gate installation with automation and power | $4,500 – $12,000 |
| Sliding gate installation, gate and track | $3,000 – $9,500 |
| Sliding gate with operator and safety edges | $5,500 – $14,000 |
Prices in San Marino climb with the things that are unusual here: custom widths, heritage ironwork that has to be matched rather than ordered, masonry piers that need re-setting before anything can hang, and long heavy sliders that need a larger operator than a stock gate would. Every figure above is an estimate, and the written estimate we give you is what sets the final price – quoted and agreed before any work starts.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in San Marino
We cover all of San Marino, and because the city is compact, one response note covers the whole map: we answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening. The estate streets and the smaller lots get the same technician and the same written estimate.
- Huntington Drive corridor
- Oak Knoll
- Lorain Road
- Lacy Park area
- San Marino’s 91108 estates
Service Area – Cities Near San Marino
San Marino sits in a tight cluster of neighboring cities, and gate work crosses those lines constantly. We also take calls from San Gabriel, CA, East Pasadena, CA, South Pasadena, CA and North El Monte, CA. The housing stock shifts as you move out of San Marino – fewer estate lots, more standard driveways – but the brand coverage and the upfront pricing stay the same.
Serving San Marino, CA – Our Local Coverage Area
We serve San Marino and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Marino
In most cases, yes. We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (888) 853-9043 and we’ll give you an honest arrival window.
Often yes. Most cities require a permit for a gate or the electrical work behind an operator, so ask San Marino’s building department directly, and check with any HOA or architectural review before ordering a custom gate. We’ll flag what we know matters.
All of San Marino, from the estate lots off Huntington Drive and Oak Knoll to Lorain Road and the streets around Lacy Park, plus the 91108 area. If you’re on the edge of town, call (888) 853-9043 and we’ll confirm coverage and a free estimate.
Contact Glendale Gate Repair in San Marino
If your gate is sagging, binding, or the operator has quit, call (888) 853-9043 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday, closed Saturday. Gates are the only thing we do, we work on the brand you already have, and every price is quoted and agreed before work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What San Marino Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Dana Norris"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Carmen Mendoza"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Jessica Kim