Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Gabriel, CA
Installing a new driveway or side-yard gate in San Gabriel means dealing with something most cities don’t throw at you: a narrow lot, an old masonry wall that may not be engineered for the weight, and mature trees that drop limbs onto the track every windy season. We’re a gate-exclusive company, so every technician we connect you with works on gates all day. That focus matters here, where a lot of the gates are original iron bolted to stucco more than a generation ago. If your gate is sticking, off its track, or you’re ready to automate it, call (888) 853-9043 and we’ll get a free estimate on the calendar.
Why San Gabriel Homes Are Different
San Gabriel’s residential streets grew up in waves – 1920s to 1950s Spanish and Mediterranean bungalows on deep-set lots, then post-war ranch homes, then newer infill squeezed onto the same blocks. Many of those deep-set properties sit behind legacy low masonry walls, and a lot of them still have their original mid-century iron driveway gates and side-yard pedestrian gates mounted to stucco. Those are beautiful, but the hinges and posts were never designed for today’s heavier gate bodies or for the pull of an automatic operator.
Then there’s the weather. Hot, dry summers and the Santa Ana wind events stress wood and push metal into expansion; winter rain swells wood, loosens hinge anchors in stucco, and shifts gates out of plumb. After a windy night, we get a run of calls from the Mission District and streets near the old Mission walls, where heavy original gates have racked and are scraping the driveway. Because San Gabriel keeps tight limits on front-yard wall heights, the answer often isn’t a bigger wall or a full replacement. It’s re-engineering the existing hanging system so the gate sits true again.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main San Gabriel Services
Most of the calls we take in San Gabriel fall into two buckets: gates that need repair, and gates that need their automatic systems fixed. Each has its own page, and both are worth a look before you book.
Gate Repair in San Gabriel
Repair here is usually about geometry before hardware. A gate that drags, scrapes the driveway, or won’t latch cleanly is telling you the post has shifted, a hinge has loosened in the stucco, or the frame has racked. We look at the whole hanging system – posts, hinges, welds, the level of the ground it swings over – before anyone touches an angle grinder. On the old iron gates common in San Gabriel, hidden corrosion at the hinge welds is a frequent culprit. You can see the full detail on Gate Repair in San Gabriel.

Electric Gate Repair in San Gabriel
Automated gates fail for specific reasons: a tired motor, a control board that’s decided to quit, a safety loop detector that no longer detects, a remote that lost its programming. We diagnose the actual brand on your post instead of working around it, which means a LiftMaster board gets a LiftMaster diagnosis. In San Gabriel, where automation is often retrofitted onto older iron gates, we also check that the operator isn’t fighting a gate that’s out of plumb – that’s how motors burn out early. Full detail sits on Electric Gate Repair in San Gabriel.

Gate Installation in San Gabriel
Installing a gate in San Gabriel starts with the same reality most of our neighbors share: an original or decades-old hanging system bolted to a low masonry wall or a stucco post that has been patched more than once. That’s why our gate installation begins with an honest read of what’s already there. We measure the opening, check whether the posts can take the load, and look at how the Santa Ana winds will hit the gate’s face. If the existing wall can’t carry a new gate safely, we say so, and we plan the footing, posts and panels around that instead of pretending it’ll be fine.
Driveway Gate Installation
A driveway gate in San Gabriel is a big swing or slide, usually over a long driveway on a lot that was laid out before anyone owned a full-size SUV. Getting the clear height and width right, and the footing deep enough to hold a heavy leaf, is the whole job. On the deep-set properties near the Mission District, that often means setting new posts rather than reusing stucco-embedded anchors.
Signs you need it
You need a new driveway gate when the existing one has racked or rusted past safe repair, when the posts have been patched too many times to hold a heavier gate, or when you’re adding a vehicle gate to a property that never had one.
What it costs in San Gabriel
Driveway gate installation in San Gabriel typically runs $3,200 to $9,500 for a manual gate, and an automatic driveway gate with operator and safety devices generally lands around $6,500 to $14,000 depending on span, material and power.
How we do it
We measure the opening and check the posts, set or reinforce footings to proper depth, hang the gate, then align the hinges and test the swing or slide through its full travel before we call it done.
Automatic Gate Installation
Automation on an older San Gabriel gate needs to be sized to the leaf, not bolted on and hoped for. A heavy original iron gate swings with more momentum than a modern aluminum one, and the operator, hinges and safety edges have to match that weight or the motor works too hard from day one.
Signs you need it
It’s time for automation when you’re manually opening a heavy gate several times a day, when a gate that once ran on an operator has stopped, or when you want controlled entry without leaving the car.
What it costs in San Gabriel
Automatic gate installation in San Gabriel typically runs $2,400 to $6,800 for the operator, controls and safety devices, with the total depending on whether power and a concrete pad already exist at the gate.
How we do it
We confirm the gate is plumb and balanced, mount and align the operator to the leaf, wire the controls and safety edges, program the remotes, and run the gate through a full open-and-close cycle to set the limits.
What Gate Installation Costs in San Gabriel
These are typical ranges, not a final quote. The written estimate you get on site is the price.
| Item | Typical range in San Gabriel |
|---|---|
| Manual driveway gate installation | $3,200 – $9,500 |
| Automatic driveway gate with operator | $6,500 – $14,000 |
| Automatic gate operator, controls and safety devices | $2,400 – $6,800 |
| Sliding gate installation | $2,800 – $8,000 |
| Pedestrian (side-yard) gate installation | $1,200 – $3,800 |
Can you install a gate on my existing San Gabriel masonry wall?
Sometimes, but we check first. Many San Gabriel walls were built low and light, with no footing engineered for a gate’s weight or wind load. If the wall can’t safely carry the gate, we’ll tell you and plan new posts instead.
Do you handle the power run and the safety edges for an automatic gate?
Yes. We plan the power run to the operator and install the safety edges and loop detectors that stop the gate if something is in its path. That safety work is part of the install, not an extra we spring on you later.
Brands We Service in San Gabriel
We diagnose and repair the brand that’s actually on your post – Elite, FAAC, LiftMaster and Mighty Mule among them, plus the rest of the nine lines we service. We don’t claim to stock parts locally; we identify what’s needed and get it moving. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Gabriel, CA
Here’s a realistic look at what the work runs in San Gabriel. Every figure is a typical range, and the written estimate sets the final price before any work starts.
| Service | Typical range in San Gabriel |
|---|---|
| Manual driveway gate installation | $3,200 – $9,500 |
| Automatic driveway gate with operator | $6,500 – $14,000 |
| Automatic gate operator, controls and safety devices | $2,400 – $6,800 |
| Sliding gate installation | $2,800 – $8,000 |
| Pedestrian (side-yard) gate installation | $1,200 – $3,800 |
| Electric gate repair | $180 – $750 |
| Manual gate repair | $150 – $600 |
| Motor or operator replacement | $450 – $1,400 |
| Control board replacement | $250 – $700 |
What pushes price up in San Gabriel is usually the structure behind the gate, not the gate itself: new footings when the old posts won’t hold, a power run to a gate with no electrical nearby, or heavier custom iron that needs a bigger operator. We quote the job, agree it with you in writing, and stick to it.
Neighborhoods We Serve in San Gabriel
We work across San Gabriel’s residential streets and into the smaller commercial properties that rely on a vehicular gate. Whether you’re in the Mission District near the old Mission walls or over on a post-war ranch block with a long driveway, the local conditions are much the same: old posts, heavy gates, and wind that finds every loose hinge. One thing that helps – after a Santa Ana wind night, the calls pile up fast, so get on the list early rather than waiting for the gate to start scraping.
- Mission District
- Near the old Mission walls
- Residential blocks along the 91776 side of town
- Infill properties on the 91775 side
Service Area – Cities Near San Gabriel
San Gabriel sits in a tight cluster of older, gate-heavy neighborhoods, and we cover the ones right next door. If you’re just outside San Gabriel, there’s a good chance we work your street too. We also serve homeowners in San Marino, CA, North El Monte, CA, South Pasadena, CA, and East Pasadena, CA. The same deep-set lots and older iron gates show up across all of them, so the repairs and installs are close cousins.
Serving San Gabriel, CA – Our Local Coverage Area
We serve San Gabriel and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Gabriel
We answer 24/7, and with fast dispatch from 7am to 7pm, Sunday through Friday, we can often reach San Gabriel the same day for repair calls. Installation work is scheduled after a measure and a written price. Call (888) 853-9043 for an exact quote – estimates are free.
Most cities require a permit for a new gate, especially one tied into a wall or an electrical operator, so ask San Gabriel’s building department before work starts. If you’re in an HOA, check the height and style rules first. We’ll work to whatever the rules allow.
We cover residential streets and small commercial properties throughout San Gabriel, including the Mission District and blocks near the old Mission walls, plus the neighboring cities around us. If you’re unsure whether your address is in range, call and we’ll confirm.
Whether your gate needs shoring up or a fresh install, the fastest way to a straight answer is a call. Reach us at (888) 853-9043 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 13 years of experience, and we’ll tell you honestly whether repair or replacement makes more sense for your San Gabriel gate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What San Gabriel Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Dana Norris"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Carmen Mendoza"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Jessica Kim