Gate Access Control Cost in Glendale - Typical Prices, Then a Free On-Site Estimate

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (888) 853-9043

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your gate repair?Free estimate, price agreed before work starts
Call (888) 853-9043

How Much Does Gate Access Control Cost in Glendale?

Gate access control in Glendale typically costs $350 to $1,800 for the equipment and installation of a standard residential system, with most single-family driveway gate jobs landing around $650 to $1,200. A simple keypad and remote entry setup sits at the low end, while multi-tenant intercom systems, loop detectors, and commercial-grade controllers with cell or internet connectivity push toward the top. Repairing an existing access control system usually runs $150 to $450, depending on whether the problem is a failed keypad, a bad control board, a misreading loop detector, or wiring that’s been chewed through.

We work exclusively on gates and the electronics that open them, which means we diagnose the actual brand you have – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule – rather than guessing at a control board we’ve never seen. That focus matters on a pricing page: an accurate number depends on knowing exactly what’s installed. Call (888) 853-9043 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Key Takeaways

  • Residential gate access control in Glendale runs $350 to $1,800 installed, with most homes in the $650 to $1,200 range.
  • Repairs to keypads, controllers, remotes, and loop detectors typically cost $150 to $450.
  • Commercial and multi-tenant systems with intercom or telephone entry run $1,200 to $5,500 or more.
  • Glendale’s hillside properties and narrow driveways often need buried conduit and longer wire runs, which add cost.
  • Every estimate we give is free, written, and sets the final price before any work begins.

Gate Access Control Cost Breakdown (2026)

The table below shows typical installed price ranges for the access control work we see most often in Glendale. These are estimates for the Glendale market in 2026, covering both parts and labor. Your written estimate is what sets the final price, because two driveways on the same street can need very different wiring.

Service Typical Cost Range (Installed) What It Covers
Keypad entry (wired or wireless) $350 – $750 Keypad, wiring, programming, weatherproof housing
Remote transmitter setup and programming $75 – $200 New remotes, receiver pairing, range testing
Intercom or telephone entry system $800 – $2,500 Entry panel, wiring, tenant directory programming
Loop detector replacement $300 – $850 Vehicle loop, saw-cutting, sealant, detector board
Control board replacement $250 – $650 New board, rewiring, reprogramming of limits and timing
Photocell or safety edge replacement $150 – $400 Safety beam, edge sensor, alignment and testing
Full access control upgrade (residential) $650 – $1,800 Keypad, remotes, receiver, smartphone module where supported
Commercial multi-tenant access system $1,200 – $5,500+ DoorKing or FAAC-class controller, entry panel, programming
Diagnostic visit for a system that won’t respond Free estimate Full inspection, written findings, upfront pricing

What drives the price up fastest is wiring distance. A keypad mounted at the curb of a long Glendale driveway can need 100 feet of buried wire and conduit, and that trenching is real labor. The other big swing is the controller itself. A residential Mighty Mule or Ghost Controls setup is a straightforward board swap. A commercial DoorKing telephone entry system with tenant directory and call-down programming takes substantially longer to configure and test.

Prices come down when the existing wiring is sound. If your gate operator is already in place and the low-voltage cable to the entry point is intact, an access control upgrade can often reuse that infrastructure and land closer to the bottom of the range. We’ll tell you honestly whether repair or replacement makes more sense before we touch anything.

Want to talk it through?Free estimate, price agreed before work starts
Call (888) 853-9043

What Affects Gate Access Control Pricing in Glendale

Glendale isn’t a flat suburb, and the gate work here reflects that. The city sits between the Verdugo Mountains and the San Gabriel foothills, and homes in the hillside neighborhoods above Glenoaks and Chevy Chase Canyon often have driveways that climb, curve, or both. That geography shows up on the invoice for good reasons.

  • Hillside driveways and longer wire runs. A gate at the bottom of a sloped drive in the Verdugo Woodlands or Adams Hill area may sit far from the house, so keypad and intercom wiring has to travel a long distance. Every additional foot of buried conduit adds labor and material, and sometimes a power source closer to the gate is the smarter call.
  • Narrow driveway approaches. In older Glendale neighborhoods, the space between the property line and the street is tight. That can mean a wireless keypad instead of a wired one, and it can mean a vehicle loop has to be positioned more carefully to avoid tripping the gate with passing traffic.
  • The brand and tier of the system. Residential systems like Mighty Mule and Ghost Controls use boards and parts that cost less and swap faster. Commercial systems from FAAC, BFT, or DoorKing cost more to service because the parts are heavier-duty and the programming is more involved. We service all nine of the brands we cover, so you don’t pay a premium because we’re unfamiliar with yours.
  • Number of entry points and users. A single-family home with two remotes and one keypad is simple. A small commercial lot with a tenant directory, eight remotes, and a call-down feature takes more programming time, and that’s reflected in the price.
  • Whether the operator is also failing. Access control problems sometimes turn out to be motor or board problems, not keypad problems. If the operator needs work too, that’s a separate line item, and we’ll show you both before you commit.
  • Power availability at the gate. Electric gates need power at the operator. If the gate has never been automated or the existing conduit is damaged, running power is part of the job and adds to the total.

One local wrinkle worth mentioning: Glendale’s older housing stock means a lot of gates here sit on properties that were built decades before anyone thought about low-voltage access control. In those cases, the old wiring to the entry point is often the first thing we check, because a 40-year-old cable buried in a planter bed can be the whole problem. If you’re not sure what your gate is running on, read about Glendale gate repair to see how a diagnostic visit works.

Access Control Repair vs. Replacement: What Makes Sense?

A repair is usually the right call when the operator is healthy and the problem is isolated to a keypad, a remote, a loop detector, or a single board. Replacement makes more sense when the controller is commercial-grade, out of parts support, or when repeated failures point to a system at the end of its service life.

Here’s the rough rule we use. If the repair comes in at less than about half the cost of a new system, repair is almost always the smarter move. If the existing system is a residential-tier controller that’s failing repeatedly and the replacement would add smartphone entry or better loop detection, the upgrade can pay for itself in reliability. We give you both numbers in writing and let you choose. From diagnostic to done, we don’t push a replacement you don’t need.

Need a price for your gate repair?Free estimate, price agreed before work starts
Call (888) 853-9043

How Do You Know If You Need New Access Control?

You need new access control when the system no longer reliably opens the gate for the people who should get in, or when it stops keeping the people who shouldn’t get in out. The symptoms show up before the gate fails completely, and catching them early usually saves money.

  • The keypad works intermittently, or only in dry weather.
  • Remotes have to be pressed repeatedly, or their range has shrunk.
  • The gate opens for cars that aren’t supposed to be there, or fails to open for cars that are.
  • The intercom crackles, or the call-down feature no longer reaches a phone.
  • The control board resets itself after a power blink.

Any of those can be a wiring problem, a board problem, or a programming problem. We handle electric and automated gate repair specifically, including motors, control boards, loop detectors, and access systems that general repair services turn away. If your Glendale gate issue is mechanical rather than electronic, the same team covers Glendale gate repair across the city, so you’re not shopping for a second vendor.

How to Save on Gate Access Control in Glendale

You can keep access control costs down by solving the cheapest problem first and by not replacing parts that are still good. Here’s what actually moves the number.

  • Get a diagnostic before you buy a new system. Plenty of “dead” keypads are one loose wire at the entry point. Our estimate is free and written, so you know what you’re facing before anything is ordered.
  • Reuse existing wiring when it tests clean. If the low-voltage cable to the gate is sound, an upgrade can often use it. That’s the difference between a $400 keypad swap and an $800 trench job.
  • Match the tier to the property. A single-family home doesn’t need a commercial DoorKing controller. A small commercial lot with tenant access does. Putting the right tier on the right property keeps you out of the expensive end of the range.
  • Fix loop detectors before they fail. A loop that’s starting to misread is cheaper to replace on your schedule than to fix after it strands you outside your own gate.
  • Bundle repair and upgrade in one visit. If the operator needs a board and the keypad needs replacing, handling both in one dispatch saves you a second appointment. Fast dispatch from 7am to 7pm, Sunday through Friday.

We service both residential and commercial properties in Glendale, and we work on the brand you already have. If you want to compare repair work on specific brands, look at our LiftMaster gate repair page or our DoorKing gate repair page, both of which show what a diagnostic visit typically covers. Estimated pricing is always free, and the written estimate is what sets the final price. Call (888) 853-9043 to book one.

When Should You Upgrade Your Gate Access Control?

An upgrade is worth considering when the existing system can’t do what the property now needs: more users, remote management, or reliable performance after repeated failures. The upgrade also makes sense when the gate operator itself is being replaced and a new controller can go in at the same time.

The most common upgrade we see in Glendale is a residential keypad and remote setup being replaced with a smartphone-capable controller on a LiftMaster or Ghost Controls operator. That’s usually a $650 to $1,200 job installed. The second most common is a failing commercial controller on a multi-tenant property being swapped for a DoorKing or FAAC system with a proper tenant directory. That runs higher, often $1,200 to $5,500 depending on the number of tenants and entry points. We’ll tell you honestly which makes sense once we look at the system.

Questions about your gate repair?Free estimate, price agreed before work starts
Call (888) 853-9043

What Happens When You Call

You tell us what the gate is doing, and whether it’s a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule. We book a diagnostic visit, and the technician tests the operator, the wiring, the loop detectors, and the entry hardware. You get a written estimate that breaks out parts and labor, and you decide. Nothing happens until you approve it.

Repairs on the spot are common when the part is something we can bring or the problem is wiring or programming. Larger jobs, like a full access control upgrade or a multi-tenant intercom, get scheduled. Same-day service is often possible. Call (888) 853-9043 for a free estimate. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.

FAQs – Gate Access Control Cost

How much does gate access control cost in Glendale?

Gate access control in Glendale typically costs $350 to $1,800 installed for a residential system, with most single-family homes landing between $650 and $1,200. Commercial and multi-tenant systems run $1,200 to $5,500 or more. Call (888) 853-9043 for an exact quote – estimates are free.

Is it cheaper to repair or replace my gate access control system?

Repair almost always costs less when the operator is healthy and the failure is isolated to a keypad, remote, loop detector, or single board – usually $150 to $450 versus $650 to $1,800 for a full residential upgrade. Replacement makes more sense when a commercial controller is out of parts support or when repeated failures point to a system at the end of its service life. We’ll show you both numbers in writing and let you choose. Call (888) 853-9043 – estimates are free.

How much does a keypad or intercom cost to install?

A wired or wireless keypad installed runs $350 to $750. An intercom or telephone entry system with tenant directory runs $800 to $2,500, depending on wiring distance and the number of tenants. Call (888) 853-9043 for a free written estimate.

Can you come today to look at my gate access control?

Same-day service is often possible in Glendale, especially on straightforward keypad, remote, and board issues. Fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (888) 853-9043 – we answer 24/7, and a call outside dispatch hours is booked into the next opening.

Do you work on commercial gate access control in Glendale?

Yes. We service both residential and commercial properties, including commercial-grade systems from FAAC, BFT, and DoorKing alongside residential brands like Mighty Mule and Ghost Controls. Commercial access control projects typically run $1,200 to $5,500 or more. Call (888) 853-9043 for a free estimate.

Why does my access control cost more on a hillside driveway?

Hillside driveways in Glendale neighborhoods like Chevy Chase Canyon and the Verdugo Woodlands often sit far from the house, so keypad and intercom wiring has to travel much longer distances. That buried conduit and labor can add several hundred dollars to a job that would be near the bottom of the range on a flat, short drive. Call (888) 853-9043 for a free on-site estimate that accounts for your actual layout.

Contact Glendale Gate Repair

If your Glendale gate isn’t letting the right people in, or if you’re planning an access control upgrade and want a real number before you commit, give us a call. We work on the brand you already have, we tell you honestly whether repair or replacement makes sense, and we don’t sell you anything your gate doesn’t need. Free estimates, upfront pricing, and a written number before any work starts.

Call (888) 853-9043 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm. Our technicians have up to 13 years of experience on gate systems and the electronics that drive them.

Pricing reflects the Glendale market as of 2026. Glendale Gate Repair offers free estimates – call (888) 853-9043.

Written by the team at Glendale Gate Repair.

What Our Customers Say

★★★★★ 4.7 from 11+ reviews

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

- Dana Norris

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

- Carmen Mendoza

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Jessica Kim
Need Gate Repair help in Glendale? Licensed & insured · 60-minute response · free estimates
Call (888) 853-9043

Request a Free Estimate

Tell us what's going on in Glendale. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7